Replacing the RV Door Lock on a 2020 Scamp 13’
https://scampgrounds.com/wp-content/themes/osmosis/images/empty/thumbnail.jpg 150 150 gavin gavin https://secure.gravatar.com/avatar/9de79417d52cde759ffedf503509748a?s=96&d=mm&r=gReplacing the RV Door Lock on a 2020 Scamp 13’
Our 2020 Scamp 13’ was delivered from the Scamp factory with the Global Link RV Entry Door Lock which is commonly used across many travel trailer brands. This lock serves to secure the trailer’s door by providing two locking cylinders (the main cylinder and a dead bolt) within the latch. Typically, if the door latch does its job then one doesn’t really think about it. But, for our Scamp, this wasn’t the case. The original lock was not only very difficult to lock and unlock, but also sometimes wouldn’t unlock (from both the outside and inside of the trailer). On one of our first trips with our Scamp, we found ourselves locked inside the trailer subject to a lock that wouldn’t open regardless of the inside lock positions. We ended up having to remove the lock and reinstall it (which seemed to work for a while). Eventually, on another trip, the end of the key snapped off inside the lock when attempting to lock the deadbolt from the outside of the trailer. Since our trailer was under the first year warranty, Scamp replaced the lock without charge.
The replacement lock we received wasn’t much better than the first one. This second door latch was always very difficult to open and lock, and, similar to the first one, presented a lot of resistance when engaging the deadbolt. We learned to live with it and were always very careful when turning the key when locking and unlocking the deadbolt. The lock was always a source of concern whenever using it; we always wondered when it would fail next. A couple of years later, the key snapped inside the lock when we were on a trip at Sequoia National Park. Fortunately, we were able to still lock and unlock the deadbolt with just the remaining part of the key (with more than half the key still broken and stuck inside the lock) for the rest of our trip! Not wanting to try a third example of this same lock (“fool me once, shame on you; fool me twice, shame on me”), we began searching for a lock replacement as soon as we arrived home. We originally liked the idea of a keyless entry lock as it would be great not having to deal with keys. We looked closely at this lock as well as another one.
However, because the 2020 Scamp 13’ door is designed with a small recessed fiberglass space for the door lock, none of the keyless entry systems we could find would fit (because of their extra wide design which accommodates the numbered buttons). So, we concentrated on finding a lock design that would match the original lock’s physical specifications so it would fit inside the hole in our Scamp’s door.
There are numerous locks available which look virtually identical to the original Global Link RV Lock which was installed on our Scamp by the factory. However, not all locks that match our physical specifications for the lock cutout are: highly reviewed, comprised of 100% metal (some have plastic parts), and have unique laser cut keys. We chose this lock by Welluck because it meets the above criteria. Additionally, it is waterproof and comes with 4 laser cut keys (cut on the inside for enhanced security). The company states that each key set is unique (although we haven’t been able to confirm this). Lastly, we really like that the Welluck lock is offered in white, a very unique color among locks, and matches our white 2020 Scamp 13’.
If there is appropriate cut out space in the door, installation of this lock should be very easy (see video above). Simply remove the existing lock by unscrewing the 4 bolts on the back plate, 2 door plate bolts, pull existing back plate, and then pull the front of the lock out from the front of the door. Installation of the new lock is the reverse of the same procedure. First, push the front of the new lock through the hole in the door front, screw in the side metal cylinder plate, and then align the hole for the deadbolt pin and position the handle slider mechanism forward and secure the back plate with the 4 bolts. Check to see the proper operation of the handle/deadbolt and keys after installation. After installation, we were pleased to find that this new lock is very sturdy and much smoother in function than our previous two manufacturer supplied locks! And, the key to our hearts with locks is a key that works without struggle or hesitation!
Disclaimer: You will get the same great Amazon price by clicking on the links here compared to buying directly on Amazon, but by buying here you will also be supporting the continuation of this website as we get a small commission from each sale. These are products and procedures we use for our own Scamp that we selected and developed from our own research and experiences. However, we do not endorse any specific product and cannot guarantee that the products we use are exemplary and the procedures we use are complete, accurate, detail the correct recommended procedures, or apply to your model small travel trailer. It’s always best to double check with your manufacturer or operation manuals to ensure you are doing everything correctly.